Double Flare Upset Bead Punch – 101854 Series – 866-028 | 0.5 TOD
Double Flare Upset Bead Punch for 1/2″ (0.500″ decimal) tube, 028 wall, driving the forming stroke in double-flare and upset tube end finishing setups.
Out of stock
Brand:
Various
Model:
101854 Series
Condition:
Not sure what Machine, Parts, or Tooling you need? We can help!
This Double Flare Upset Bead Punch drives the forming stroke that shapes 1/2″ (0.500″ decimal) tube, roughly 028 wall thickness, into an upset or double-flare profile. It is matched to its companion die, and the two work together to fold or thicken the tube end before the final flare is set. Wear on this punch shows up as inconsistent flare depth, so keeping a spare on hand helps tube end forming lines avoid downtime. It is part of the 101854 series; compatible with DF tube end forming machines, and is a good fit for shops standardizing their pipe end finishing tooling.
Series: 101854
Tube Outside Diameter (TOD) -Fractional Inches: 1/2″
Tube Outside Diameter (TOD) – Decimal Inches: 0.500
Tip No: 866
Wall Thickness: 028
Machine Compatibility: DF
| TOD | Punch No. | .028 | .035 | .042 | .049 |
|---|---|---|---|---|---|
| 3/16 | 366 | -028 | -035 | -042 | -049 |
| 1/4 | 466 | -028 | -035 | -042 | -049 |
| 5/16 | 566 | -028 | -035 | -042 | -049 |
| 3/8 | 666 | -028 | -035 | -042 | -049 |
| 7/16 | 766 | -028 | -035 | -042 | -049 |
| 1/2 | 866 | -028 | -035 | -042 | -049 |