Flare Die – Standard 45° – 45-4500 Series – 45-4524 | 1.5 TOD
Standard Flare Die sized for 1-1/2″ (1.500″ decimal) tubing, shaping a clean 45° flare on every cycle of your tube end forming setup.
Out of stock
Brand:
Various
Model:
45-4500 Series
Condition:
Not sure what Machine, Parts, or Tooling you need? We can help!
Precision-ground for 1-1/2″ (1.500″ decimal) tube stock, this Standard Flare Die produces a 45° flare with a clean, burr-free finish ready for assembly. The die is proportioned at 1-1/4″ to keep the tube centered and supported as the flare forms. It is a practical choice for pipe end finishing lines running mixed tube sizes, since it can be swapped quickly between jobs. It is part of the 45-4500 series; compatible with 3CPV, 8CP w/ die adaptor tube end forming machines, and is a good fit for shops standardizing their pipe end finishing tooling.
Series: 45-4500
Tool Diameter – H: 4.5″
Tube Outside Diameter (TOD) -Fractional Inches: 1-1/2″
Tube Outside Diameter (TOD) – Decimal Inches: 1.500
Degrees: 45°
Thickness (T): 1-1/4″
Machine Compatibility: 3CPV, 8CP w/ die adaptor
0