Flare Center – Standard 45° FC450 | 0.125 – 1.5 TOD
Spindle-mounted Standard Flare Center for accurate centering on 0.125 – 1.5 diameter tube during hydraulic end-forming operations.
Out of stock
Brand:
Various
Model:
Series
Condition:
Not sure what Machine, Parts, or Tooling you need? We can help!
This Standard Flare Center locates and centers tube ranging from 0.125 – 1.5 OD in the machine spindle before the flare die engages. Accurate centering keeps the 45° flare concentric with the tube bore, which matters for fittings that need to seal on the first try. It is intended for hydraulic end-forming operations that run a mix of tube diameters through the same machine setup. It is compatible with 2C, 2CP, 2CPV, 3CPV w/ spindle adaptor, 8CP w/ spindle adaptor, tube end forming machines, and is a good fit for shops standardizing their tube end finishing tooling.
Tube Outside Diameter (TOD) -Fractional Inches: 1/8″ – 1-1/2″
Tube Outside Diameter (TOD) – Decimal Inches: 0.125 – 1.5
Degrees: 45°
Machine Compatibility: 2C, 2CP, 2CPV, 3CPV w/ spindle adaptor, 8CP w/ spindle adaptor,
0