Double Flare Upset Bead Punch – 101854 Series – 566-028 | 0.3125 TOD
Double Flare Upset Bead Punch for 5/16″ (0.313″ decimal) tube, 028 wall, driving the forming stroke in double-flare and upset tube end forming setups.
Out of stock
Brand:
Various
Model:
101854 Series
Condition:
New
Not sure what Machine, Parts, or Tooling you need? We can help!
Built to mate with its corresponding die, this Double Flare Upset Bead Punch forms the upset or double-flare shape in 5/16″ (0.313″ decimal) tube, roughly 028 wall thickness. Getting this step right sets up the tube wall so the finished flare has enough material to seal properly. It is a common wear item in end finisher tooling kits and is worth replacing at the first sign of galling or rounded edges. It is part of the 101854 series; compatible with DF tube end forming machines, and is a good fit for shops standardizing their end finisher tooling.
Series: 101854
Tube Outside Diameter (TOD) -Fractional Inches: 5/16″
Tube Outside Diameter (TOD) – Decimal Inches: 0.313
Tip No: 566
Wall Thickness: 028
Machine Compatibility: DF
| TOD | Punch No. | .028 | .035 | .042 | .049 |
|---|---|---|---|---|---|
| 3/16 | 366 | -028 | -035 | -042 | -049 |
| 1/4 | 466 | -028 | -035 | -042 | -049 |
| 5/16 | 566 | -028 | -035 | -042 | -049 |
| 3/8 | 666 | -028 | -035 | -042 | -049 |
| 7/16 | 766 | -028 | -035 | -042 | -049 |
| 1/2 | 866 | -028 | -035 | -042 | -049 |