Double Flare Upset Bead Punch – 101854 Series – 666-028 | 0.375 TOD
Hardened Double Flare Upset Bead Punch sized for 3/8″ (0.375″ decimal) tube, 028 wall, made for repeat-cycle tube and pipe end-forming production.
Out of stock
Brand:
Various
Model:
101854 Series
Condition:
New
Not sure what Machine, Parts, or Tooling you need? We can help!
This Double Flare Upset Bead Punch is sized to 3/8″ (0.375″ decimal) tube, roughly 028 wall thickness, and produces the forming stroke needed for a proper double flare or upset end. Because it contacts the tube directly, punch condition has a direct effect on flare consistency and finish quality. It fits standard double-flare tooling setups used across tube and pipe end-forming shops. It is part of the 101854 series; compatible with DF tube end forming machines, and is a good fit for shops standardizing their tube end finishing tooling.
Series: 101854
Tube Outside Diameter (TOD) -Fractional Inches: 3/8″
Tube Outside Diameter (TOD) – Decimal Inches: 0.375
Tip No: 666
Wall Thickness: 028
Machine Compatibility: DF
| TOD | Punch No. | .028 | .035 | .042 | .049 |
|---|---|---|---|---|---|
| 3/16 | 366 | -028 | -035 | -042 | -049 |
| 1/4 | 466 | -028 | -035 | -042 | -049 |
| 5/16 | 566 | -028 | -035 | -042 | -049 |
| 3/8 | 666 | -028 | -035 | -042 | -049 |
| 7/16 | 766 | -028 | -035 | -042 | -049 |
| 1/2 | 866 | -028 | -035 | -042 | -049 |