Flare Die – Heavy Duty 37° – 30-3700HD Series – 30-3707HD | 0.4375 TOD
Heavy Duty Flare Die that forms a precise 37° flare on 7/16″ (0.438″ decimal) tube, built for repeatable hydraulic end-forming work.
Out of stock
Brand:
Various
Model:
30-3700HD Series
Condition:
Not sure what Machine, Parts, or Tooling you need? We can help!
Built for tube end finishing, this Heavy Duty Flare Die forms a 37° flare in 7/16″ (0.438″ decimal) OD tubing with tight, repeatable geometry. The die profile is sized to grip and support the tube wall through the full forming cycle, reducing the risk of wrinkling or off-angle flares. Because it mounts directly into compatible flaring machine dieheads, it slots into existing end finisher workflows without extra setup. It is part of the 30-3700HD series; compatible with 2C, 2CP, 2CPV, 3CPV w/ die adaptor tube end forming machines, and is a good fit for shops standardizing their end finisher tooling.
Series: 30-3700HD
Tool Diameter – H: 3″
Tube Outside Diameter (TOD) -Fractional Inches: 7/16″
Tube Outside Diameter (TOD) – Decimal Inches: 0.438
Degrees: 37°
Thickness (T): 1-1/4″
Machine Compatibility: 2C, 2CP, 2CPV, 3CPV w/ die adaptor
| Tool OD | Leonard Precision | Clarke & Lewis | PHI | Conrac | Dew Machine Tool |
|---|---|---|---|---|---|
| 1/4" | NA | NA | 800002-009 | NA | NA |
| 3/8" | 30-3706HD | CL30-3706HD | 800002-001 | 30-3706HD | DEW 30-3706HD |
| 7/16" | 30-3707HD | CL30-3707HD | 800002-002 | 30-3707HD | DEW 30-3707HD |
| 1/2" | 30-3708HD | CL30-3708HD | 800002-003 | 30-3708HD | DEW 30-3708HD |
| 5/8" | 30-3710HD | CL30-3710HD | 800002-004 | 30-3710HD | DEW 30-3710HD |
| 3/4" | 30-3712HD | CL30-3712HD | 800002-005 | 30-3712HD | DEW 30-3712HD |
| 7/8" | 30-3714HD | CL30-3714HD | 800002-006 | 30-3714HD | DEW 30-3714HD |
| 1" | 30-3716HD | CL30-3716HD | 800002-007 | 30-3716HD | DEW 30-3716HD |