Flare Die – Standard 37° – 10-37100 Series – 10-37128 | 8 TOD
Standard Flare Die that forms a precise 37° flare on 8″ (8.000″ decimal) tube, built for repeatable hydraulic end-forming work.
Out of stock
Brand:
Various
Model:
10-37100 Series
Condition:
Not sure what Machine, Parts, or Tooling you need? We can help!
Built for end finisher, this Standard Flare Die forms a 37° flare in 8″ (8.000″ decimal) OD tubing with tight, repeatable geometry. The die profile is sized to grip and support the tube wall through the full forming cycle, reducing the risk of wrinkling or off-angle flares. Because it mounts directly into compatible flaring machine dieheads, it slots into existing tube and pipe end-forming workflows without extra setup. It is part of the 10-37100 series; compatible with 8CP tube end forming machines, and is a good fit for shops standardizing their tube and pipe end-forming tooling.
Series: 10-37100
Tool Diameter – H: 10″
Tube Outside Diameter (TOD) -Fractional Inches: 8″
Tube Outside Diameter (TOD) – Decimal Inches: 8.000
Degrees: 37°
Thickness (T): 3.9″
Machine Compatibility: 8CP
| Tool OD | Leonard Precision | Clarke & Lewis | PHI | Conrac | Dew Machine Tool |
|---|---|---|---|---|---|
| 6 1/4" | 10-37100 | CL10-45100 | NA | NA | NA |
| 6 1/2" | 10-37104 | CL10-45104 | NA | NA | NA |
| 6 3/4" | 10-37108 | CL10-45108 | NA | NA | NA |
| 7" | 10-37112 | CL10-45112 | NA | NA | NA |
| 7 1/2" | 10-37120 | CL10-45120 | NA | NA | NA |
| 8" | 10-37128 | CL10-45128 | NA | NA | NA |