LEMAS TR180/6 Three Roll Plate Roll
Features on LEMAS 3-Roll Machines:
- Direct-Drive Design using no belts or chains -Less maintenance, better performance
- Grooves for 1/4″, 3/8″ and 1/2″ round bar.
- Power tilting side bending roll for cone rolling – No need to manual adjust for cone bending
- Cone bending attachment – Already integrated for your cone bending needs
- Hydraulically operated drop-end for quick removal of rolled product – Easy open allows you to easily slide out finished part
- Forward/Reverse rotation controls – Ability to walk around entire machine while controlling rotation
- Sumitomo Cyclo® 6000 gearless speed reducers – The hardest working in the industry.
Brand:
LEMAS
Model:
TR180/6
Condition:
Not sure what Machine, Parts, or Tooling you need? We can help!
Additional Features:
- Hydraulically powered bending roll – No manual adjustment needed
- Pinch gap indicator – Set the perfect roll gap every time with no guessing.
- Control panel mounted at machine with digital readout for position of rear bending roll – All machine controls easily located.
- Upper and lower pinch rolls driven
- All rolls heat treated to 50 Rc – Keeping your rolls in peak condition as long as possible
- Spherical roller bearings on all rolls
- Manual tilt of the lower pinch roll
- Emergency stop cable
OPTIONAL EQUIPMENT:
- Top Supports
- Infinitely Variable Speed Control
- Control Panel on Wheels
LEMAS has been distributing metal fabricating machinery in the United States for over 20 years including delivering hundreds of plate bending rolls since 2001.LEMAS initial pinch bending rolls feature hydraulic adjustment of the rear bending roll and the lower pinch roll. In addition, the rear roll is hydraulically tiltable for cone rolling, and the hydraulic drop end makes it simple to remove the completed cylinder from the rolls.
Unique to LEMAS initial pinch machines is the Quick and Easy pinch gauge adjustment. Consistent positioning of the lower pinch roll is critical to rolling consistent quality cylinders. By simply inserting a small tab of the material thickness to be rolled into the pinch gauge control, the lower pinch roll is properly positioned to ensure that consistency.
Sumitomo Cyclo® 6000 gearless speed reducers, featuring unique epicycloidal design, have advantages superior to speed reducers using common tooth gears. Unlike gear teeth with limited contact points, a Cyclo has two-thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gear motors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
Other standard features include Direct-Drive Design using no belts, cone rolling attachment, rolls heat treated to 50Rc, digital readout for positioning the rear bending roll, and grooves for 1/4″, 3/8″ and 1/2″ round bar (except 80 series models).
The long list of standard features together with competitive pricing makes the LEMAS roll a continuing favorite of the metal fabricating industry.
Rolling Capacity: 6′ x 1/4″ (Typical Mild Steel – 36 KSI Yield)
Diameter of all Rolls: 7.10″
Rolling Speed: – approximately 16′ per minute
Motor Power: 5 HP drive motor; 2 HP hydraulic system motor
Voltages: 230V/3-Phase or 480V/3-Phase
Approximate Weight: 5,900 pounds
Approximate Dimensions: 125″ x 42″ x 45″