Pines #2 Hydraulic Tube Bender and tooling
Brand:
Pines
Model:
Condition:
Used
Not sure what Machine, Parts, or Tooling you need? We can help!
🏗️ Used Pines #2 Hydraulic Tube Bender – With Tooling for 2”–3” Exhaust Work
This Used Pines #2 Hydraulic Tube Bender comes fully outfitted with over $12,000 in new tooling and parts, making it an ideal setup for fabricators focused on exhaust systems, stainless, and aluminized tubing. It’s a 3-phase machine, partially refurbished, and ready to run production with only minor TLC needed for perfection.
If you’re in the automotive, motorsport, or custom exhaust fabrication business, this is your chance to start bending immediately—with tooling for 2″ to 3″ tube sizes, stainless mandrels, new clamps, and more.
⚙️ Key Features & Upgrades
| Feature | Details |
|---|---|
| Model | Pines #2 Hydraulic Tube Bender |
| Power | 3-Phase |
| Rotation Direction | Not specified (assumed standard RH or LH as required) |
| Tooling Sizes | 2″, 2.25″, 2.5″, 3″ for 14ga aluminized and 16ga stainless |
| New Tooling Included | • 3″ clamps • 2.5″ clamps • 2.5″ & 3″ stainless wiper dies |
| Mandrel System Upgrades | • New 1-1/4″ mandrel rod w/ custom ends • Rebuilt mandrel extractor |
| Support Components | • New clamping die rods, bushings, pins |
| Hydraulic Service | Tank drained, cleaned, new filters and fresh fluid |
| Location | Florida |
| Loadout & Transport | 48 hours’ notice required; hydraulic fluid must be drained before move |
✅ Why Buy This Package?
-
🔧 $12K+ in new tooling & parts – Save thousands on startup costs
-
🚚 Includes common exhaust tube sizes – Get to work right away
-
🛠️ Recent maintenance & rebuilds – No guessing on machine condition
-
🏭 Perfect for exhaust fab shops – Aluminized & stainless support
-
🧰 Minor TLC = Major ROI – Machine is functional and revenue-ready
🏁 Perfect For:
-
Automotive exhaust and header shops
-
Custom fabrication shops
-
Motorcycle and motorsport part manufacturers
-
Muffler & pipe repair businesses
-
HVAC or stainless tube work
📞 Ready to Bend & Ship from Florida
This Pines #2 Tube Bender is loaded with tooling and upgrades—ready to load on your trailer with 48 hours’ notice. Whether you’re starting a fab shop or scaling production, this machine is priced to move and built to last.
👉 Contact now to schedule inspection or request a freight quote.
Used Pines #2 Hydraulic Tube bender
W/Tooling:
Tooling for 2″ 2.25″ 2.5″ 3″ 14 gauge aluminized exhaust tubing and 16 gauge stainless mandrels and wiper dies New: 3″ clamps New 2.5″ clamps New wiper dies 2.5 and 3″ for stainless. New 1 1/4″ mandrel rod and custom made ends New clamping die rods bushing and pins. Rebuilt mandrel rod extractor cylinder. Machine was drained of hydraulic fluid then the holding tank wiped clean and new filters installed and fluid. 12k in new tooling and repairs 3 phase Machine works and still needs a little love to make perfect, but ready to start making parts and money today can load on your trailer with 48 hours notice of pick up hydraulic fluid must be drained before moving.
Located in Florida